Courses

CMDDA1 Carbon Monoxide Testing Training Course (Parent)

Course Overview

Any prices shown exclude VAT and are for the full course which includes, Training, Exams & practical assessments. This CMDDA1 qualification is aimed at qualified domestic gas engineers who respond to carbon monoxide alarms or reports of fumes in homes.

 

CMDDA1 candidates will be trained and assessed in the following areas:-
  • Carrying out ambient CO and CO2 testing
  • Combustion performance analysis using electronic portable gas analysers on domestic gas appliances in dwellings following:
  • Indication of fumes
  • Smells
  • Spillage or leakage of combustion products
  • Carbon monoxide detector activation
  • Course Overview

    General Information

    ACS – CMDDA1 Carbon Monoxide/ Dioxide Atmosphere and Appliance Testing
    Gas Qualifications
    CMDDA1
    5 years
  • Entry Requirements and background

    This CMDDA1 qualification is aimed at qualified domestic gas engineers who respond to carbon monoxide alarms or reports of fumes in homes.

    It assesses their ability to measure CO/CO2 levels and identify the source of fumes using an electronic combustion analyser. Applicants need existing core gas safety qualifications—such as CCN1 or CCLP1, or an accepted equivalent—plus relevant domestic appliance qualifications.

    Its scope excludes commercial premises and formal CO poisoning incident investigations, which require separate qualifications.

    The Gas Safety (Installation and Use) Regulations 1998 & The Gas Safety (Installation & Use Regulations) (Northern Ireland) 2004

    Regulation 3(1)—competence—is the main link to needingthe qualification. It requires anyone carrying out work on a gas fitting to be competent. CMDDA1 demonstrates competence in investigating domestic  COAlarms and fumes;  HSEguidance, L56, page 22

    The work also relates to:

    • Regulation 26(9): safety checks immediately after work on an appliance, including the flue, combustion air, operating pressure/heat input and safe functioning.
    • Regulation 34(1) and (3): preventing use of a suspected dangerous appliance and informing the responsible person when an engineer identifies danger. HSE L56, pages 55 and 62

    For CO escapes specifically, Regulation 37(8) extends the escape-of-gas provisions to CO from incomplete combustion. However,network-supplied natural gas is excluded by regulation 37(7); its emergency response and investigation duties fall under the Gas Safety (Management)Regulations. HSEexplanation

    This gas safety assessment is designed to test the competence of an operative in determining ambient levels of CO and presence of CO2 in dwellings and identifying the cause of fumes using a portable electronic combustion analyser. This will typically be any engineer who responds to the genuine report of a CO alarm being activated or a report of fumes.

    The scope of the assessment covers Type A, B & C domestic gas appliances fitted in dwellings and follows the guidance and procedures outlined in BS 7967. Related information has also been issued by HSE in the form of HSE Guidance Notes HSE(EH)40 and HSE(L)56, Gas Safety (Installation & Use) Regulations. 

    It does not cover commercial premises and appliances or the procedures to adopt following an incident reportable under RIDDOR. Where an engineer is required to carry out a formal CO incident investigation on behalf of a gas supplier as part of their obligation under gas safety legislation, the engineer would need to have successfully achieved a relevant qualification in the investigation of CO poisoning and carry out the investigation in accordance with the Institution of Gas Engineers and Managers (IGEM) Industry Standard (IGEM/GL/8)

  • Assessment Methods

    Assessment is carried out using a variety of assessment methods including multiple choice, short written response and scenario questions and observed practical assessment

  • Need Extra time to revise? & approximate Certification Times

    Please Note: Multiple choice Exams and practical assessments will take place at the end of the course. However, if the assessor agrees that additional study time is required, you may be offered the option to return at the end of the next available course. Please inform your class Tutor or Assessor if you believe you need additional time so this can be discussed. For more information refer to our website Terms & Conditions of Service.

    Our aim and KPI (Key Performance Indicator) is to achieve successful candidate certification within 30 working days from completion of exams/assessments, receipt of all prerequisite information (e.g. past certificates), and payment in full. Certification is subject to final approval by the relevant Awarding Body External Verifier.

  • Reading Material & Text books required?

    The course includes all necessary reference documents &  reading material necessary for candidates to complete the exams & Assessments.

  • Useful downloads & Links

    HSE L56 — Safety in the installation and use of gas systems and appliances

    The regulations, Approved Code of Practice and guidance covering competence, appliance safety and dangerous situations. Free PDF.

    Free links:

    For candidates working in Northern Ireland, providethe NI regulations and HSENI-approved guidance. HSENI’s pagespecifically identifies the fourth edition of L56 (2013) as approved forNI


    HLAC Handbook for learners V1.14

    GN8 Guidance Note Sept 2022

    LCL Awards UKAS SCOPE & ACS Codes

    LCL Awards Digital Certificates coming soon

Course Details

  • Duration: 2 Days
  • Cost: £768
Enquire Today

Enquire About This Course: CMDDA1 Carbon Monoxide Testing Training Course (Parent)

Please complete the form below and a member of our team will get back to you.

Enquiry Form
Marketing Opt In

Secret Link