Courses

Level 3 Heat Pumps Systems Combined Air & Ground (Non-refrigerant Circuits) – Qualification 603/7792/6 (Parent)

Course Overview

Any prices shown are partial course content only and excude VAT. This is a Parent course made up of sessions. Candidates may cherry pick which parts of the course they wish to complete (i.e. individual Sessions) or select the full course (which includes all sessions which make up the full course) depending on their experience. If you are unsure please get in touuch

 

This qualification is designed for both experienced heating/plumbing operatives. It supports existing heating engineers, plumbers and gas engineers who have experience with wet or fossil-fuel central heating systems, offering a route to transition into the renwables heating industry.  It supports careers as a:

  • Air Source Heat Pump Installer or Service Engineer
  • Renewable heating specialist working in residential or commercial settings
  • Heating contractor or technician for low-carbon systems

The qualification can help you remain competitive in the growing renewable energy sector, where demand for skilled heat pump installers is expected to rise significantly.

The qualification is recognised by the Microgeneration Certification Scheme and may be required by MCS certified employers. 

This suite of three new regulated qualifications have been brought up to date in association with Heat Pump Association UK, industry and MCS and are designed for learners from a heating background (wet central heating systems) to demonstrate their knowledge in the Installation and Maintenance of Heat Pumps Systems (non-refrigerant circuits)

This particular course is Level: 3, Credit Value: 3 for Air or Ground Source Individual Route, 4 for combined Air & Ground Source

NOTE: Whilst the qualification is designed for sealed refrigerant systems and precludes the knowledge and competence requirements to break, make and fill split refrigerant circuits which would be covered by separate Refrigerant Handling Qualifications, the knowledge and understanding criteria are still relevant and this qualification could be undertaken by operatives wishing to install splits systems so long as they are also separately qualified in the handling of refrigerants as described in the EU F-GAS regulation and the Fluorinated Greenhouse Gases Regulations. (see related qualifications below)

  • General Information
    Level 3 Award in the Installation and Maintenance of Heat Pump Systems (Non-Refrigerant Circuits)
    Renewables Qualifications, Refrigeration & F-Gas Qualifications, Heating Qualifications
    IMASHPS_H26, IMGSHPS_H26 and IMHPS_H26

    LCL Awards Level 3 Award in the Installation and Maintenance of Air Source Heat Pump Systems (non-refrigerant circuits)  – 603/7790/2 

    LCL Awards Level 3 Award in the Installation and Maintenance of Ground Source Heat Pump Systems (non-refrigerant circuits) – 603/7791/4  C00/4532/1

    LCL Awards Level 3 Award in the Installation and Maintenance of Heat Pump Systems (non-refrigerant circuits) – 603/7792/6  C00/4532/2

    Level: 3, Credit Value: 3 for Air or Ground Source Individual Route, 4 for combined Air & Ground Source
    (IMASHPS_H26) 20 GLH 30 TQT Credit Value: 3, (IMGSHPS_H26) 20 GLH 30 TQT Credit Value: 3, (IMHPS_H26) 30 GLH 40 TQT Credit Value: 4
  • Learning Outcomes (full specification download)
  • Prerequisites

    An Initial Assessment conducted by the Approved Centre (AC) on application for the qualification will determine the learner’s capability to complete the qualification.

    Learners holding a level 2 or 3 vocational qualification (NVQ) in the Building Engineering Sector  as detailed below, which includes the current WRAS Water Regulations/Water Byelaws, Hot Water Systems & Safety (Approved Document (AD) G3, and Low Temperature Heating and Hot Water Systems in Dwellings will confirm their capability to complete the qualification and therefore meet the pre-requisite requirements.

    •    N/SVQ Level 2/3 in Plumbing or equivalent earlier certification that provides evidence of competence
    or
    •    N/SVQ Level 2/3 in Heating and Ventilating (Domestic Installation) or equivalent earlier certification that provides evidence of competence
    or
    •    N/SVQ Level 2/3 in Heating and Ventilating (Industrial and Commercial Installation) or equivalent earlier certification that provides evidence of competence
    or
    •    N/SVQ Level 2/3 in Oil-Fired Technical Services or equivalent earlier certification that provides evidence of competence
    or
    •    N/SVQ Level 2/3 in Gas Installation and Maintenance or equivalent earlier certification that provides evidence of competence

    Alternatively
    •    Learners that do not hold a vocational qualification as detailed above who are experienced wet central heating installers, evidenced either by registration with; Gas Safe Register (CENWAT), OFTEC (OFT10-105E or OFT15-108W), MCS (Heat Pump or Solar Thermal Hot Water) or HETAS (H004) registration will confirm their capability to complete the qualification and therefore meet the pre-requisite requirements. 
    Plus, current certification in (if not covered in the above N/SVQ qualifications): 

    •    Water Regulations/Water Byelaws (or equivalent) 
    •    Hot Water Storage Systems & Safety Approved Document (AD) G3. 
    •    Low Temperature Heating and Hot water Systems in Dwellings

    Note: The experience requirements for these learners will normally be 3 years. Where the Initial Assessment of the learner confirms they have the necessary skills, knowledge and experience which can be evidenced via RPL assessment, this duration may be reduced. Current certification means that it has not expired or been revoked.
    The above pre-requisites are not required where this qualification is being delivered as part of an N/SVQ or apprenticeship
    Learners not holding a qualification above, will be required to provide evidence to the Approved Centre of an alternative suitable qualification and or provide confirmation of their related work experience and skills (minimum of 3 years).

     

  • Need extra time to revise and approximate certification times

    Please Note: Your exam will normally take place at the end of the course. However, if the tutor or assessor agrees that additional study time is required, you may be offered the option to return at the end of the next available course. Please inform your class tutor if you believe you need additional time so this can be discussed. For more information refer to our website Terms & Conditions of Service.

    Our aim and KPI (Key Performance Indicator) is to achieve successful candidate certification within 30 working days from completion of exams/assessments, receipt of all prerequisite information (e.g. past certificates), and payment in full. Certification is subject to final approval by the relevant Awarding Body External Verifier.

  • Reading Material

    CCTS have a class library of reading material available for your use during your training. These will be sufficient for you to complete the learning outcomes of the course.

Course Details

  • Duration: 4 Days
  • Cost: £165
Enquire Today

Enquire About This Course: Level 3 Heat Pumps Systems Combined Air & Ground (Non-refrigerant Circuits) – Qualification 603/7792/6 (Parent)

Please complete the form below and a member of our team will get back to you.

Enquiry Form
Marketing Opt In

Secret Link